Mike Malkin is the owner of Malkin & Daughters Decks & Renovations. As a solo installer, Mike is drawn to the ICON ScrewJoist due to its lightweight, speed and ease of installation.

QUICK & EASY INSTALL

“It’s fast – everything’s pre-measured, pre-cut. No joist hangers or hurricane ties needed, you just screw right down into it.”

ICON ScrewJoists are deliv­ered pre-cut spe­cif­ic to your job and require no cut­ting (although they can be cut if need­ed). The joists slot right onto the ledger, requir­ing no joist hang­ers, and the bot­tom chord can be fas­tened right onto the car­ry­ing beam –elim­i­nat­ing the need for hur­ri­cane ties. Addi­tion­al­ly, the block­ing on ICON is a sin­gle 2X8 that is slid right through the webs of the joists.

LIGHT & WORKABLE

“They’re light – I can fling them up onto an 8, 9, 10 ft deck.”

ICON ScrewJoists are approx­i­mate­ly ¹⁄₃ the weight of tra­di­tion­al pres­sure treat­ed lum­ber. This makes car­ry­ing and installing them much eas­i­er and less tax­ing – espe­cial­ly when hoist­ing them onto ele­vat­ed struc­tures, and espe­cial­ly when work­ing alone – like in Mike’s case.

FLAT & LEVEL

“You get a flat product when you’re done – you don’t have to sit there with the planer for 2 days.”

ICON ScrewJoists are pro­duced in a fac­to­ry using only KDAT (Kiln-Dried After Treat­ment) lum­ber. This means there is no more need to plane each joist to make sure the deck sur­face is lev­el – sav­ing hours or even days of time. The struc­ture is ready for deck­ing imme­di­ate­ly after joist instal­la­tion and blocking.

TIME SAVINGS

“This deck would have taken me 4 to 5 days [when framing traditionally] to frame, block, have ready to deck – as opposed to maybe 2.”

PROs often save days of install time when using ICON – sav­ing on labor costs and allow­ing them to get to more projects over the course of a year.

QUICK & EASY ORDERING PROCESS

“I take my very basic deck plan, I email it off – they provide me with back with an engineer-stamped plan that I can submit to my building inspector. Within a week I had joists on site ready to go. Doesn’t get any easier than that.”

ICON is quick and easy to order. If you’re with­in the ser­vice area, (MA, CT, RI, VT, NY, ME & NH) sim­ply fill out this form to get start­ed, and a Fas­ten­Mas­ter rep will be in touch. All you need to do is pro­vide Fas­ten­Mas­ter with a sim­ple deck plan and our engi­neers will get to work design­ing you engi­neered plan and will have it to you typ­i­cal­ly with in 24 – 48 hours. Once you approve the plan, the joists will be man­u­fac­tured to size and deliv­ered to your job­site in as lit­tle as 1 week.

“Get your first ICON job going and you’ll never look back.” – Mike Malkin

The ICON ScrewJoist is currently available in MA, CT, RI, VT, NY, ME & NH. Click here to get started!

Mike Malkin is the own­er of Malkin & Daugh­ters Decks & Ren­o­va­tions in Dan­vers, MA. Learn more at malkin​daugh​ters​.com.